ss

BridgeCom Blog

RSS
TWO-WAY RADIO REPEATERS: HOW TO CHOOSE AND INSTALL

TWO-WAY RADIO REPEATERS: HOW TO CHOOSE AND INSTALL

TWO-WAY RADIO REPEATERS: HOW TO CHOOSE AND INSTALL

A two-way radio repeater takes weak and low-performing signals and retransmits them at a higher power so they can cover longer distances, ranges, and terrains without degradation. Repeaters eliminate unwanted noise and interference, helping to clarify messages as they are strengthened and re-transmitted. When properly installed, radio repeaters provide reliable communication signals from one radio to another, almost completely eliminating dead zones.

Read now
What is a duplexer and how do you tune one?

What is a duplexer and how do you tune one?

I've tuned a lot of duplexers over the years. Since we install duplexers in our repeaters and sell duplexers as part of our system packages, I often get asked about them. How do they work? What are they used for?...

Read now
Dayton Hamvention 2017 Reflection

Dayton Hamvention 2017 Reflection

What can I say about Dayton Hamvention 2017 other than WOW! It had everything; Great venue, 30,000 of your favorite ham radio friends, great vendors, Rain, Rain, and more Rain, good food, great buys, mud and on-site camping. Did I...

Read now
BridgeCom Systems New BCD Series Duplexers

BridgeCom Systems New BCD Series Duplexers

November 14, 2015BridgeCom Systems, IncPhone: (816)532-8451 E-Mail: tim@BridgeComSystems.comContact: Tim KingFor Immediate ReleaseIntroducing the NEW BCD Duplexers by BridgeCom Systems________________________________________________________________________BridgeCom Systems, Inc is pleased to announce the availability of the BCD line of duplexers for the amateur and commercial radio markets....

Read now
Receiver Desense Testing by Karl Shoemaker, AK2O From Repeater-Builder.com

Receiver Desense Testing by Karl Shoemaker, AK2O From Repeater-Builder.com

Receiver desense testing by Karl Shoemaker, AK2O

Introduction

Due to the inability of certain people to communicate properly and understand all the aspects of site testing this page was created to read, compare notes and build on for the benefit of all. Human communication, comprehension and understanding problems is beyond the scope of this document, however the reader should keep these problems in mind when dealing with site issues and interfacing with other companies and government Agencies. Misunderstandings, bogus readings, log entries, technician and management diagnostics and plan of actions for problem solving are commonly mis-directed with considerable time and expense wasted in the wrong direction of efforts. This can lead to the general desensitation (pun intended) and poor attitude of the workforce in most any private company or government in the technical (repair) field around this country. Fortunately, there still is a handful of technicians that care to understand what the problem is and the proper way to solve, or at least, reduce the symptoms to an acceptable figure. If you are reading this it's most like you are in one of the latter. This is a good thing.

Read now

BridgeCom Systems Adds Pinterest

The world of Pinterest has come to BridgeCom Systems. We will be adding product photos, videos, install photos and much more to our Pinterest page.  "Now you can easily pin BridgeCom photos and other content to our Pinterest page. We...

Read now