BridgeCom Official Blog

July 23, 2019 Jared Farouki

John 'Miklor' K3NXU DMR "The Very Basics" Guide
John 'Miklor' K3NXU - 'The Very Basics' Guide to DMR.
Read now
May 31, 2017 Tim King

Dayton Hamvention 2017 Reflection
What can I say about Dayton Hamvention 2017 other than WOW! It had everything; Great venue, 30,000 of your favorite ham radio friends, great vendors, Rain, Rain, and more Rain, good food, great buys, mud and on-site camping. Did I...
Read now

March 16, 2016 Tim King

MARCH 2016 MISSOURI SECTION ARRL NEWS

MARCH 2016 
MISSOURI SECTION NEWS
Cecil Higgins MO SM

           I want to thank all the volunteers that are continuing to
serve the ARRL Missouri Section in their appointed positions for the
Section. You are a great group and I really appreciate you all. 
         Don’t forget that the Missouri QSO Party, sponsored by the
Boeing Employees Amateur Radio Society, will be April 2nd and 3rd. You
can check out all the information about the MOQP at the BEARS website
by using the link http://w0ma.org/index.php/missouri-qso-party.  Look
over the whole site and use the links about the rules and other
information that will prove quite valuable.

Read now

January 7, 2016 Tim King

65 Great Things about Ham Radio by CQ Magazine
Clearly written by hams for hams. 65 great things about ham radio from CQ Magazine

1. It works when nothing else does
2. It makes you part of a worldwide community
3. The opportunity to help neighbors by providing public service and emergency communications
4. Some of the nicest people you'll ever meet
5. Some of the smartest people you'll ever meet
6. Some of the most interesting people you'll ever meet
7. Some of the most generous people you'll ever meet (along with some of the cheapest!)
8. Lifelong friendships
9. Friends around the world (including those you haven't met yet)
10. The opportunity to go interesting places you might not otherwise go to
Read now
December 2, 2015 Tim King

Hamfest Back in Vegas
After an absence of nearly three decades, Las Vegas is once again poised to host an amateur radio convention.

NVCON, the ARRL Nevada State Convention will take place April 29, 30, and May 1, 2016 at the new Eastside Cannery Hotel/Casino Event Center.

Las Vegas was once the site of the long running SAROC, the Sahara Amateur Radio Operators Convention. SAROC was second only to the Dayton Hamvention is size and attendance.
Read now
September 9, 2015 Tim King

BridgeCom Systems Adds Pinterest
The world of Pinterest has come to BridgeCom Systems. We will be adding product photos, videos, install photos and much more to our Pinterest page. "Now you can easily pin BridgeCom photos and other content to our Pinterest page. We...
Read now
July 28, 2015 Tim King

The Rain Report: Hap Holly Interviews BridgeCom Founder Ron Kochanowicz pt 2
BridgeCom Systems founder and chief engineer, Ron Kochanowicz, was asked questions for the Rain Report at 2015 Dayton Hamvention. Here is the audio from the Rain Report interview, inside the Rain Booth with Hap Holly, KC9RP. You can also visit, www.therainreport.com, for...
Read now
June 19, 2015 Tim King

FM Repeaters – An Introduction

Article by Stu Turner, WØSTU

Operating on VHF/UHF FM repeaters is one of the most popular activities in amateur radio. For the new ham, FM repeater ops are often the first and most common on-air experiences, but accessing repeaters also represents a significant initial vexation for the new ham to overcome. Mastering the integrated concepts of frequency pairs, tones or other squelch methods, transceiver channel programming, and repeater on-air protocols is the first significant operational challenge that many hams will encounter in their new hobby.

This article introduces fundamental concepts of FM repeater operations for the new ham and depicts a high level view of typical FM phone repeater anatomy and functioning. The goal is to demystify repeaters and help the newly licensed Technician overcome any initial bewilderment about repeaters. Let’s get off to a great start in ham radio with solid footing in repeaters!

Read now
June 17, 2015 Tim King

BridgeCom visits Ham-Com 2015 Irving, TX
Here are some thoughts and pictures from our visit to Ham-Com 2015 in Irving, TX.

Ron and I left the Kansas City, MO area on Thursday morning and it was 80+ degrees. When we got to TX it was 90+ degrees, so summer is officially here.

Driving from MO to TX without the radio on leaves for a lot of random conversation, good, but random. Ron and I discussed our thoughts and expectations for Ham-Com. We expected to have a good booth location, plenty of foot traffic, and generate a positive buzz surrounding BridgeCom Systems and our products. We packed with us three repeaters (BCR-50V, BCR-220, BCR-40U), the new BCM-220 mobile, and our MV-DMR server in a 2U chassis, plus the assorted banners and spec sheets.

We arrived in TX about 3:30p Thursday and went straight to the Irving Convention Center to unload and set up. The people of TX are very nice, lots of yes sir, no sir. We got set up pretty quickly, we like to keep the booth small with just a few products and brochures. I'm not a fan of the table across the entire front of the booth, but it seemed to work well this time giving us some shelter from the masses. However, I should have put the banners out front on the corners where people could have seen them better.

Read now