BridgeCom Blog

RSS
How to update the firmware of the AnyTone AT-D868UV

How to update the firmware of the AnyTone AT-D868UV

Chuck - K0XM:
We've got a lot of calls, uh, with AnyTones and the Firmware updating and it's a really simple process. You have to tell the radio to go into Firmware update mode and I'm going to show you how to do that real quick. First of all before you do that, you have to install the Firmware update program, which is known as QX Pro Install or excuse me, QX Pro Update, which is that program right there. And you'll see it firing up. And all my stuff is set up to run as administrator on my Windows 10 computer. That makes life so much simpler but what you'll do is you'll update this file right here. Now, I'm gonna take a brand new AnyTone out of the box. This has come from the factory with version point 2.27 Firmware. I'm going to take it to 0.29.
Read now
How To Select Feedline For A Repeater, By Todd, KY4TS

How To Select Feedline For A Repeater, By Todd, KY4TS

A common overlooked part of putting together a repeater system is the selection

of proper feedline. "But, coax is coax, isn't it?" "I use LMR-400 for all my stations at home. That should be good enough for a repeater, right?" Well, not necessarily.

 

Read now
Press Release: BCM-144 & BCM-440 Mobile Radios

Press Release: BCM-144 & BCM-440 Mobile Radios

April 24, 2017BridgeCom Systems, IncPhone: (816)532-8451 E-Mail: tim@BridgeComSystems.comContact: Tim KingPress Release: NEW BCM-144 & BCM-440 Mobile Radios Now Shipping________________________________________________________________________BridgeCom Systems, Inc is pleased to announce the availability of BCM-144 and BCM-440 Mobile Radio for the amateur radio market. The join...

Read now
Amateur Radio Linking Explained

Amateur Radio Linking Explained

Amateur Linking What is amateur radio linking and why is it so important, necessary, or just plain fun? Let's say you want to set up a repeater at Hamvention and talk to the group back home. How is that possible?...

Read now
K1PQ Repeater 70cm Install and Club

K1PQ Repeater 70cm Install and Club

Hello BridgeCom, Our original 444.950 repeater was an old Motorola unit setup and operated by N1BUG. It worked but required too much time and attention. Our club voted to continue operations on 444.950 so we bought the BridgeCom and now...

Read now
IRLP is easy with a BridgeCom

IRLP is easy with a BridgeCom

Do you have an old aging IRLP node computer? Is it on again off again, or somoeone has to go to the site to reset the system? There is a better way as the Desert Rats found out. Here's the...

Read now