How To Fix Low Speaker Mic Volume On Your AnyTone

How To Fix Low Speaker Mic Volume On Your AnyTone

 

Hi this is Cody from BridgeCom Systems. Some of our customers have reported a low volume from their speaker mic. So today I'm going to tell you how to fix this inconvenience.

Now to fix this, what you want to do is click on Menu, and we're going to go up to Settings and then go to Radio Set.

Then you're going to go down to the bottom, and it's going to be selection number nine, Ear Max Volume, not Max Volume Level. That's going to be for the radio itself. This one is for the actual microphone or speaker that's plugged into it.

So click on it. Now, this radio came on level three. Now put it up to the max, go to level eight, or whatever is comfortable for you, and now it's set.

So hopefully this helps. That's it for now.

This is Cody from BridgeCom Systems, 73.

Back to blog

13 comments

Same issue here. Anytone 878 used to be way too loud. Now with max vol set at 8 on code plug and on radio i have to hold it to my ear to barely hear it.

Ed Glynn

Same issue as Larry and Keith.

Mike

I’m having a similar issue like Kieth and Larry, the RX or audio out of the radio is so weak that it’s hard to even use. Tried using Bluetooth speaker and headset and the issue persists to other outbound audio devices. Any help with this would be greatly appreciated.

Cheers

Michael P

Hi have no audio

Mel Vin

Keith – I’m having the same issue with my 878. The RX audio level is super low even with the Max Vol Level set to 8. Did you find a solution?

73
Larry
HB9EYQ

Larry

Leave a comment

Please note, comments need to be approved before they are published.