BridgeCom Official Blog

RSS

NEW BridgeCom Systems BCH-220 Handheld Radio

July 14 2015 BridgeCom Systems, Inc Phone: (816)532-8451 E-Mail: tim@BridgeComSystems.com Contact: Tim King Introducing the NEW BCH-220 Handheld Radio ______________________________________________________________________________ Bridgecom Systems, Inc is pleased to announce the availability of a 220 MHz Handheld radio to the amateur radio market....

Read now

Texas Council Deploys BridgeCom Interoperability System

Texas Council Deploys BridgeCom Interoperability System BridgeCom Systems deployed a wide-area communications solution for Nalcom Wireless in Palestine, Texas, which serves the communications needs of the Heart of Texas Council of Governments (HOTCOG). BridgeCom deployed single-channel gateways and controllers to...

Read now
FM Repeaters – An Introduction

FM Repeaters – An Introduction

Article by Stu Turner, WØSTU

Operating on VHF/UHF FM repeaters is one of the most popular activities in amateur radio. For the new ham, FM repeater ops are often the first and most common on-air experiences, but accessing repeaters also represents a significant initial vexation for the new ham to overcome. Mastering the integrated concepts of frequency pairs, tones or other squelch methods, transceiver channel programming, and repeater on-air protocols is the first significant operational challenge that many hams will encounter in their new hobby.

BCR Repeater Installs

This article introduces fundamental concepts of FM repeater operations for the new ham and depicts a high level view of typical FM phone repeater anatomy and functioning. The goal is to demystify repeaters and help the newly licensed Technician overcome any initial bewilderment about repeaters. Let’s get off to a great start in ham radio with solid footing in repeaters!

Read now

BridgeCom visits Ham-Com 2015 Irving, TX

Here are some thoughts and pictures from our visit to Ham-Com 2015 in Irving, TX.

BridgeCom Systems Ham-Com 2015 BoothRon and I left the Kansas City, MO area on Thursday morning and it was 80+ degrees.  When we got to TX it was 90+ degrees, so summer is officially here.  

Driving from MO to TX without the radio on leaves for a lot of random conversation, good, but random.  Ron and I discussed our thoughts and expectations for Ham-Com.  We expected to have a good booth location, plenty of foot traffic, and generate a positive buzz surrounding BridgeCom Systems and our products.  We packed with us three repeaters (BCR-50V, BCR-220, BCR-40U), the new BCM-220 mobile, and our MV-DMR server in a 2U chassis, plus the assorted banners and spec sheets.  

We arrived in TX about 3:30p Thursday and went straight to the Irving Convention Center to unload and set up.  The people of TX are very nice, lots of yes sir, no sir.  We got set up pretty quickly, we like to keep the booth small with just a few products and brochures.  I'm not a fan of the table across the entire front of the booth, but it seemed to work well this time giving us some shelter from the masses.  However, I should have put the banners out front on the corners where people could have seen them better.

Read now

BridgeCom Systems New Site adds a Shop!

Smithville, MO – BridgeCom Systems, Inc is proud to announce the launch of their new website, www.BridgeComSystems.com. The new website will have very functional design and layout with easy access to all of the content. It will feature a BridgeCom...

Read now
Repeater Basics: What is a 2-way radio repeater and how is it used?

Repeater Basics: What is a 2-way radio repeater and how is it used?

What is a Repeater?

In the world of modern communication there is an ever increasing need for providing higher outreach. The traditional portable radios offer limited coverage area. However, a dedicated transceiver can help us achieve the requisite coverage.

A repeater is essentially a communication device which acts as a link between two radio operators to cover a large area. If you need a large coverage area like your 50,000 acre ranch, city, county or even an entire state, a repeater system comes in handy.

How it Works?

It is a two-way radio frequency communication system which receives a frequency from portable two-way radios, and re-transmits it at another frequency in real-time, albeit at a higher wattage than typical portable radios. This mechanism allows repeaters to broadcast to a much wider reception spectrum. Since it is capable of both transmitting and receiving at the same time, it is also called a ‘Transceiver’.

Read now

Radio over IP - What is it?

ROIP Radio over Internet Protocol (RoIP) is a two-way communication method which involves trans-reception of radio communication signals over internet protocol (IP). Cost effective and power efficient, RoIP essentially leverages the same communication principles as that of VoIP but requires...

Read now