Skip to content

BridgeCom Official Blog

  • Check out Hector Carveth-KB2VWD With His AnyTone 878!
    January 7, 2020 Blake Haley

    Check out Hector Carveth-KB2VWD With His AnyTone 878!

       Hector KB2VWD enjoys his AnyTone 878 and so should you! The intuitive interface, Bluetooth capabilities, and DMR/Analog APRS will have you smiling the second you open the box. This means you will be able to easily navigate the radio...

    Read now
  • Spanish 3-Step DMR Guide
    September 16, 2019 Jared Farouki

    Spanish 3-Step DMR Guide

    Know someone that speaks Spanish and wants to get on DMR?

    We've got you covered with the DMR 3-Step Guide that has been translated into Spanish.

    Send them this link to help them get on DMR! 

    Read now
  • How to update the firmware on the AnyTone 878
    July 18, 2019 Jared Farouki

    How to update the firmware on the AnyTone 878

      Hi everyone, this is Cody from BridgeCom Systems, I'm going to be showing you how to update the firmware on your AnyTone radio. Now, this is going to be specific to the 878 and the 878 PLUS, and possibly newer versions, but currently, this is what it applies to.
    Read now
  • How To Change the Transmit Power on your AnyTone
    July 17, 2019 Jared Farouki

    How To Change the Transmit Power on your AnyTone

    Hi, everyone. This is Cody from BridgeCom Systems. In this video, I'm going to be showing you how to adjust the power level on your AnyTone radio. As you can see here, there's no way to actually change the power level right now, of the transmit power. There's a variety of reasons why you might want to do this. First up, open up your programming software, in this case, this radio is using, I believe, it's 111. We've got the software open here. Now go into optional settings and go to a key function.
    Read now
  • How to Add Local Repeaters to your DMR Plug and Play Package
    July 15, 2019 Jared Farouki

    How to Add Local Repeaters to your DMR Plug and Play Package

      Hi, everyone. This is Cody with BridgeCom Systems and in today's video, I'm going to be showing you how to add local repeaters to your new plug and play package. Now, this is really easy to do. You just have to install the CPS, and we're going to program up to a new zone so you can have all your local repeaters right in your radio. So, if we go over here to the actual radio itself, we can see right now the only zone in here is your DV MEGA zone. So, we can change the channels on there, but we don't have any other repeaters and there's no way to really add them in.
    Read now