ss
Click or scroll to zoom
Tap or pinch to zoom
BridgeCom Systems BCR-40U (450-520 MHz) UHF Repeater
Click or scroll to zoom
Tap or pinch to zoom
BridgeCom Systems BCR-40U (450-520 MHz) UHF Repeater
Click or scroll to zoom
Tap or pinch to zoom
BridgeCom Systems BCR-40U (450-520 MHz) UHF Repeater
https://www.youtube.com/watch?v=bids7YCJspA
BridgeCom Systems BCR-40U (450-520 MHz) UHF Repeater

BCR-40U (450-520 MHz) UHF Repeater

$ 1,195.00

Lead Time: 1-2 Weeks

"Very well pleased with BridgeCom repeaters and other communications products, the service and customer support, and the prices. Thanks! "

-Chris D., BCR-40U Repeater customer

 ALL BCR REPEATERS AND DUPLEXERS ARE CREATED AND PRE PROGRAMMED TO YOUR SPECS AT NO ADDITIONAL CHARGE!

Struggling, with your current repeater, or lack thereof? Is your club or organization having issues with the system your currently using? Well, don’t give up hope because we have the solution for you.

Introducing the ComLink™ BCR FM Repeater System by BridgeCom Systems, Inc. The BCR Repeater provides a feature-rich, extremely reliable repeater/base station combo.  

Packed with loads of RF power, this dual fan-cooled unit is one of the best sounding commercial and amateur radio repeaters on the market. It's a great choice for your new repeater.

Rather than continuing to repair the old one, consider ordering a new  BCR-40U. It's the perfect solution for a primary or back-up repeater for A.R.E.S. and R.A.C.E.S. applications where emergency management personnel and storm spotters need reliability.  It is also a perfect fit for your commercial LTR and Conventional applications.

Also available with a UHF 6 cavity duplexer installed, with tuning and cabling.  

Each BCR Repeater includes FREE Programming!  Please include Tx/Rx Frequency, PL Tone In/Out, Station ID, Desired Transmit Output Power within the Special Instructions during checkout.  


Question & Answer (Q&A)

Q - Can the 220 MHz repeater power a repeater controller? I know the repeater has 13.8 volt for battery backup but can i power the Arcom rc210 controller from that connection?

A - Yes, you can power an Arcom rc210 from the repeaters battery back up terminals.


Q - Is the insertion very low say 1.2 db or 1.5 db?
 
A - The insertion is 1.4 db. So very low.


Features

  • UHF (450-520 MHz) - 40 Watts Continuous Duty
  • Digital Ready for Dual Mode (Digital/Analog)
  • Designed and assembled in the USA
  • 2 - year warranty
  • Windows® Based Programmer (Sold Separately)
  • Built-In 11.2A Power Supply
  • Battery Backup with Built-in Charging Circuit
  • Dual Cooling Fans
  • Front Panel Speaker
  • 25-pin Accessory Connector
  • Adjustable Squelch
  • 12.5 kHz/25 kHz Channel Spacing
  • Over-the-Air Programming and Maintenance via DTMF Tone Sequences
  • Built-in station CWID - Morse rate programmable 10-25 wpm
  • The MAX TX POWER when transmitting 40Watts is ~9 Amps
  • Quiescent draw is around ~250mA
  • FREE Initial Programming

    Read the BCR-40U reviews on eHam.net

    BCR Repeater Owner's Manual

    BCR Repeater Spec Sheet

     

    Chat with us online or give us a call us at (816)-532-8451 if you have any questions.

    Click this link to view Klarna payments FAQ.