Ham Shack Pack II

SkyBridge Plus

• Pi3B Board 
• 400% Faster Boot Up Speed than original SkyBridge with Pi0 Board
• 2.4” LCD Screen that displays the following information:
• Contact’s Name, Callsign and Mode ID
• TX and RX Frequencies
• Contact’s Country and Country Flag
• Digital Mode You Are On with symbol
• Talkgroup or Node You Are On
• RSSI
• BER
• Your IP Address
• If you are “ON AIR” or not
• 3.38X MORE screen area compared to the 1.3” OLED Screen
• Compared to 1.3” OLED Screen on original SkyBridge that displayed only callsign and timeslot
• User Adjustable Screen Brightness
• Can easily scan and identify your internet’s IP address on screen without having to use an IP finding tool
• Direct RJ45 Ethernet Port  - no need for an adapter
• Wired and wireless(Wifi) 2.4ghz internet connection 
• High Performance Quad Core 1.2GHz 64bit processor. 
• SkyBridge board fully assembled and tested
• Compatible with DMR, D-star, Yaesu System Fuzion (YSF), and NXDN radios
• Supports the following Cross-Mode Capabilities: DMR to NXDN, NXDN to DMR, DMR to YSF, YSF to DMR and YSF to NXDN
• Supports operation on both 2m (144Mhz) and 70cm  (440Mhz) bands
• Up to 10mW RF power
• SMA female antenna connector, dual-band VHF/UHF antenna included
• The open-source firmware (MMDVM) is pre-loaded and is easily upgraded via software
• Easy to use PI-STAR operating software
• 1 Year Warranty
• FCC Part 15 Certified

AnyTone AT-D878UVII PLUS

• VHF/UHF DUAL BAND: Features both DMR digital and analog modes. DMR Tier I and Tier II operation.
  
• Auto senses digital or analog reception
• Massive Memory: 4,000 Memory Channels, 10,000 DMR Talk Groups, 500,000 Digital Contacts, 250 zones, up to 250 channels per zone
  
• Color TFT Display: 1.77-inch color TFT screen for Day or Night operation with Dual or Single Channel display
  
• Power: VHF: 7/5/2.5/0.2W, UHF: 6/5/2.5/0.2W
  
• Frequency Range: 136-174 MHz (V) / 400-480 MHz (U)
  
• Bandwidth: 12.5K/25K (Analog); 12.5K (DMR)
  
• Up to 35 hours between charges with the supplied 3100 mAh lithium-ion battery
• Analog APRS Transmit Only
• GPS
• Fixed and defined CTCSS/DCS encode and decode
• DTMF/2TONE/5TONE encode and decode
• Four different Tone-pulse frequencies
• Individual/Group/All call
• Support Contact Manager
• Display the Caller ID and name
• SMS via keyboard, One touch call/text
• Zone selection; Ranging function between radios with GP
• ANI function and PTT ID; VOX; Digital Recording and Play
• Roaming function; Talker alias function
• IP connect to Motorola Repeater
• Emergency alarm (with GPS data transmission)
• Enhanced CPS allows direct input and export of channels, digital IDs and talkgroups
• 2-pin style Kenwood K1 type earphone and speaker mic connection for a variety of accessories
• APRS Receiver (Rx)
• FCC Part 90 Certified, FCC ID: T4KD878UV

AnyTone AT-D578UVIIIPRO

• Working Mode: Full duplex on UU, UV, VV, VU. Dual RX(Analog+DMR or Analog+Analog)
• True-2-slot: Provide 2-slot communication which allows for 2 talk paths on 1 frequency; ETSI DMR Tier I and II compliant
• Power: VHF 50W/25W/10W; UHF 45W/25W/10W
• DC Power Required to Operate: 13.8 Volts & 18 Amps
• Auto-senses digital or analog reception
• 4000 channels + VFO; 10,000 Talk groups with 500,000 digital contacts
• Support Contact Manager
• Display: 1.77 inch TFT color LCD, dual display; dual PA; dual PTT
• Bandwidth: 12.5K/25K (Analog); 12.5K (DMR);
• Weather Alerts
• VOX Function; Digital Recording and Play
• DTMF/2TONE/5TONE encode and decode
• AES256 digital encryption; Zone selection
• SMS via keyboard
• Crossband repeater function
• Ranging function between radios with GPS
• Roaming function; Talker alias function
• Emergency alarm (with GPS data transmission)
• IP connect to Motorola Repeater
• Duplexer Talk(Optional)
• Call interrupt(Optional)
• FCC ID: T4K-D578UVIII