If you are receiving a “repeater not found” message, it is most likely going to be for the following reasons: An invalid color code or time slot has been entered for the repeater. Please note that even if a...
Cody from BridgeCom Systems, and I'm going to be showing you today how to add a channel for a local repeater to your standard DV MEGA codeplug that ships with your Plug 'N Play package.
Hi everyone, this is Cody from BridgeCom Systems, I'm going to be showing you how to update the firmware on your AnyTone radio. Now, this is going to be specific to the 878 and the 878 PLUS, and possibly newer versions, but currently, this is what it applies to.
Hi, everyone. This is Cody from BridgeCom Systems. In this video, I'm going to be showing you how to adjust the power level on your AnyTone radio. As you can see here, there's no way to actually change the power level right now, of the transmit power. There's a variety of reasons why you might want to do this. First up, open up your programming software, in this case, this radio is using, I believe, it's 111. We've got the software open here. Now go into optional settings and go to a key function.
Hi, everyone. This is Cody with BridgeCom Systems and in today's video, I'm going to be showing you how to add local repeaters to your new plug and play package. Now, this is really easy to do. You just have to install the CPS, and we're going to program up to a new zone so you can have all your local repeaters right in your radio. So, if we go over here to the actual radio itself, we can see right now the only zone in here is your DV MEGA zone. So, we can change the channels on there, but we don't have any other repeaters and there's no way to really add them in.
Hi, everyone. This is Cody from BridgeCom Systems, and in this video, I'm going to be showing you how to reinitialize your radio. So this will apply to the AnyTone 868, 878, 878 PLUS, and probably future radios. But that's what it applies to at this point in time.
